Smd Rework Stations

Product Details:

1. Voltage: 220V AC
2. Power consumption:Maximum540W; Working time: Maximum320W
3. Air Pump: Diaphragm pumps
4. Capacity: 24L / minHighest
5. Temperature range: 100-480 deg C

Tags: QUICK 990AD Digital SMD, QUICK 990AD ELECTRONIC Digital SMD, QUICK 990AD SMD

QUICK 990AD AC220V 540W Digital SMD Rework Soldering Station with Hot Air Gun Controllable Air Volume

• Sensor closed loop , microcomputer digital temperature control , power, rapid heating, temperature accuracy and stability , without the influence of wind .
• Anti-static design to prevent damage due to static or leakagePCB.
• Contact pads without soldering methods may waive parts shift and thermal shock.
• Can dramatically adjust air flow and temperature , welding and soldering can be selected according to requirements of different nozzles.
• Imported heater, nozzle and heating element together with the international brand .
• After the work is completed off air desoldering work delay and prolong the life of the heating element and the handle.

Product Details:

NEW 5 IN 1 Automatic Hot Air Gun SMD Soldering BGA Rework Station for mobile phone repair SMD 919 D

• MODEL : 919D
• FEATURE : 5 IN ONE MACHINE
• BEST QUALITY PRODUCT WITH VERY LOW PRICE
• WORKS VERY EASILY

Tags: 919D-hot-air-gun-desoldering-station-five-in-one-power-supply, 919D-power-supply

• Model:  919D
• Centigrade/Fahrenheit Programmable
• ESD Safe
• Total Power Consumption: 750 Watts
• Hot Air Gun – Brushless Ball
• Hot Air Gun: 500 Watts
• Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down Safety Feature
• Hot Air Gun Air Flow: 120L/Min
• Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
• Hot Air Gun Tube Material: 100% Silicone
• Soldering Iron: 60 Watts Total Power Output
• Temperature Range 392°F ~ 896°F/200°C ~ 480°C
• Soldering Iron Temperature Stability: ±4.8°F/1.0°C – Cord Length: 56.0 In./142.2 Cm.
• Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
• Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
• Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
• Shipping Weight: 8 Lbs.
• Weigth:4.2kg/pcs
• Rated voltage:110/220V – 50 Hz

Product Details:

• Model: QUICK 2008
• Category: LED microcomputer digital display
• Power consumption: 700w
• Airflow type: brushless fan soft wind
• Gas flow rate: 120 litres/minute.
• Temperature control range: 100°C – 500°C
• Display form: LED digital (resolution 1°C)
• Handle component length: 120 cm
• Body size: 13.8 x 10 x 15cm
• Weight: 1.55 kg
• Noise: less than 45 db

Tag: Quick-2008 smd

Product Details:

Tags: Element Heater, Heating Element, smd element

Product Details:

high quality smd rework station with easy uses this smd not burn the plastic and have in stock with best price

latest model

tags: 850 ad, baba 850 ad brown smd, baba 850 ad brown smd rework station, smd rework station

high quality smd rework station with easy uses this smd not burn the plastic and have in stock with best price

latest model

Product Details:

Quick DetailsBrand Name: QuickModel Number: Quick 861DWVoltage: 220VCurrent: Rated Capacity: 1~120 LevelRated Duty Cycle: 1000wDimensions: 188(L)*245(D)*135(H)mmWeight: 3.65KGUsage: For unsoldering SOIC,CHIP,PLCC and BGA.Certification: ISOName: ESD Quick 861DW SMD Rework StationItem no: Quick 861DWCondition: NewPower consumption: 1000W (Max)Color: GreyFrequency: 50/60HZAirflow range: 1~120 LevelTemperature range: 100 ~500 CStyle: hot air gunFeature: Anti staticTags: quick smd, QUICK SMD 861DW, smd 861dw

Product Details:

QUICK 857DW+ LEAD FREE ADJUSTABLE HOT AIR HEAT GUN WITH HELICAL WIND 580W SMD REWORK STATION

Tags: 857dw+ smd, QUICK 857D SMD, quick 857dw Plus, QUICK 857DW+, quick 861dw smd, SMD 857D

Product Details:

Tags: BABA 850AT REWORK STATION, smd rework station, SMD Rework Station BABA850AT

SMD Rework Station BABA850AT

Product Details:

Tags: K3 REWORK STATION, smd rework station

Product Details:

1. Brand : BABA
2. Model : 930D
3. Color : Black & Blue

Package includes:

• 1 unit  SMD
• 1  gun
• soldering iron
• soldering iron stand
• 3 nozzles

Tags: baba 930d smd, smd 930D, smd rework station

SMD-REWORK-STATION- BABA 930d

• Digital Lead-Free Mobile Phone Soldering Rework Station
• microcomputer control warming-up quickly
• Adjust the airflow and temperature control rotation
• Refer to the instructions included with three kinds of nozzles (big medium and small) replacement part
•  Would replace the part if the resistance value is incorrect
• When the temperature is less than 70 degrees can stop rotation automatically
•  Intelligent system that could alarm Fault detection automatically
• High-quality resistance good for long service life
• Safe solder and other temperature-sensitive components
• Intelligent detection and cool airflow features
• Green lines and high-quality silicone body heat good for extend the life and save power

Product Details:

BABA 850 SMD Rework Station (Normal)

We offer SMD Rework Station, In order to meet the set quality standards, these are manufactured using the best grade raw material and sophisticated technology. Highly appreciated among clients for their sturdiness, easy operation, accuracy, low maintenance and durability, these are available in variegated specifications. The offered smd rework stations are tested on various parameters of quality in order to deliver flawless range at clients end. Our product range also comprises of Soldering Station and Power Supply.

 

 

Tags: BABA 850 SMD Rework Station, smd rework station

BABA 850 SMD Rework Station (Normal)

We offer SMD Rework Station, In order to meet the set quality standards, these are manufactured using the best grade raw material and sophisticated technology. Highly appreciated among clients for their sturdiness, easy operation, accuracy, low maintenance and durability, these are available in variegated specifications. The offered smd rework stations are tested on various parameters of quality in order to deliver flawless range at clients end. Our product range also comprises of Soldering Station and Power Supply.

Product Details:

• 850Ad solder station are add new feature for manual and auto transform
• x put the key to auto: when you put the gun on the holder over 2 minute, that the gun will enter into standby mode
• x put the key to manual: when you put the gun on the holder, that the gun still work along

WITH EASY USES THIS SMD NOT BURN THE PLASTIC AND HAVE IN STOCK WITH LOWEST PRICE

Tags: 850 AD, BABA 850 AD SMD REWORK STATION, baba smd 850 ad, smd rework station


Solder station adds a new feature for manual and auto transform. x put the key to auto: when you put the gun on the holder over 2 minutes, that the gun will enter into standby mode. x put the key to manual: when you put the gun on the holder, that the gun still works along with the main function. 850Ad hot air SMD reworks station chip used Samsung microcomputer control, warming up quickly. Safe solder qfp, PLCC, BGA, and other temperature-sensitive components. Adjust the airflow and temperature control rotation. Refer to the instructions included with three kinds of nozzles (big, medium and small) replacement parts. Would replace the part if the resistance value is incorrect. When the temperature is less than 80oc, it can stop rotation automatically. Intelligent detection. Green lines and high-quality silicone body heat good for extend life and save power. Comfortable portable handheld and the digital LED display.

Product Details:

1.Using the touch-screen design, easy to use and quick fashion.
2.Non-programming style:
1) Has ten working channel CH0 ~ CH9 can store various parameters, quickly
select parameters according to IC type.
2) Each channel has time to work, air flow, temperature three parameters, set
the parameters according to IC type, time is set to 0 can not afford to start
the machine.

Tag: BABA 993D REWORK STATION

We provide best Smd rework station

1.Using the touch-screen design, easy to use and quick fashion.
2.Non-programming style:
1) Has ten working channel CH0 ~ CH9 can store various parameters, quickly
select parameters according to IC type.
2) Each channel has time to work, air flow, temperature three parameters, set
the parameters according to IC type, time is set to 0 can not afford to start
the machine.

  

Product Details:

LED precise digital display, manual and automatic mode, multi file adjustment, small noise, HK-850 hot air gun SMD

Tags: hk 850 smd, hk-850, mechanic hk 850, mechanic hk 850 smd

LED precise digital display, manual and automatic mode, multi file adjustment, small noise, HK-850 hot air gun SMD

• Multi stage adjustment, 8 stage wind power, electrodeless high temperature
• 550W high power heating core
• Quiet design, in line with national standards, small noise
• The spiral air outlet has high safety factor and uniform heating
• Safety protection, automatic cold air function, protection of air gun

 

Strong air pump air supply: 24L air pump, strong wind pressure, the bottom of the air pump is equipped with silica gel pad, effectively reduce vibration

It is in accordance with the design of human mechanics, comfortable grip, high temperature resistant and flame retardant environmental protection material, long service life.

Imported ceramic skeleton heating core, heating wire using skeleton winding technology, increase stability, not easy to burn, short circuit.

Automatic cold air design, handle on the handle frame, let the machine automatically cool to 70 degrees, into standby state can be shut down

LED accurate digital display, accurate temperature control, good linear temperature, non analog temperature control, can effectively avoid the damage due to temperature error welded components

BS plugs meet international BS1363-1 standards, 250V, 13A, length 1.25 meters, BS plugs for family, business, light industry and similar purposes

Product Details:

Mechanic HK8587D 700W 220V LED Digital Display 2 In 1 Hot Air SMD Rework Station Soldering Station Iron Heat Gun Kit for Phone Welding Repair

Power Consumption: 700W
Voltagle: 220V
Soldering Iron Output Temperature: 200°c – 480°c
Hot Air Gun Output Temperature: 100°c – 480°c
Display:LED Digital Display
Air Flow: 120 L/min (max)

Tags: MECHANIC 2 in 1 SMD, MECHANIC 2 in 1 SMD HK-8586D, MECHANIC HK-8586D

Features:

• LED accurate digital display. effectively avoid the damage of components due to temperature error
• Small Size. Save working space.
• Hot Air Rework Station and Soldering Station 2 in 1.
• Ceramic skeleton heating core,increase stability and not easy to burn short circuit.
• Spiral flow air, high speed,low noise and strong wind

•  Brand Name: Quick
•  Model Number: Quick 705
•  Voltage: AC220V
•  Dimensions: 29*28*21cm
•  Weight: 3.4kg
•  Item Name: Quick 705 hot-air soldering iron, hot air bga rework station
•  Power Consumption: 700W
•  Power consumption of soldering iron: 50W
•  Airflow type: Soft revolving airflow
•  Temperature Range: 100 ~450
•  Temperature range of soldering iron: 200 ~480

Tags: 2 in 1 Soldering Station, quick 705, quick 705 smd, quick 705 soldering iron

Product Details:

Brand Name: QuickModel Number: 858DVoltage: AC220v (110V need customize)Dimensions: 25.5*16*14.5cmWeight: 1.8kgUsage: for most of rework stationName: Quick 858D digital cellphone PC automatic BGA hot air Rework StationFeature: Cool / Hot Air, Temperature Adjustable,Temperature displayPower Consumption: 700WBlower Fan: Brushless FanAirflow type: brushless blower Soft revolving airflowHeater: 100???~450???Air Range: 1~8Airflow Capacity: 120Level (max)Amount Wind: 120L/M(maxTags: 858d SMD, Quick 858d automatic SMD, Quick 858D digital automatic SMD, Quick 858d SMD, quick smd

Product Details:

SMD Handle

Product Details:

Features:

• An ideal replacement for factory handles on the heat guns.
• The handle comprises heating core, magnetic switch, temperature sensor and power cord.
• Made with high-grade material and fine workmanship, it is solid, reliable and durable.
• Rotary design is suitable for 858, 858D, 878A, 878D and 878D+ unsoldering work bench.
• Ultra long power cord allows for flexible and comfortable use.

Tag: 858d SMD Handle